“M995A”中性結構膠是一種性能優良的結構硅酮密封膠:1)單組分，室溫型，使用方便：2)中性固化，不腐蝕大多數基材; 3)粘結性強，強度高，合理的柔韌性和伸長量；4)具有耐臭氧、耐紫外線等抗老化性能;5)耐高低溫性能卓越，在-40℃~150℃的范圍內保持彈性;6）適合于玻璃,金屬建材,石材,混凝土,磚瓦,陶瓷,塑料間的結構性粘結密封.使用:1)施工溫度在5℃~40℃之間;2)用兩塊布法清潔基材;3)將膠嘴按需要的大小做45°切斷;4)將膠打滿接縫處；5)約30分鐘結皮，應在此前進行修整.重要:1)使用前請做材料相容性測試;2)不用于表面溫度(45°C)以上的材料;3)不用于有滲出物的材料；4)不用于長期潮濕或完全的密閉環境.注意:遠離兒童!避免接觸眼睛和皮膚!如有接觸,請用水沖洗;仍然不適的請就醫檢查.執行標準:GB/T 16776-2005保質期:9個月(<24℃) “MEISHI 995A”is a high performance structural silicone sealant: 1)one-component，room temperature，easy to use；2)neutral curing,no corrosion to the materials;3)excellent adhesion,high strength,appropriate of flexibility and elongation 4)Is the excellent performance of heat and cold, Keep elastic between in low(-45℃) and high(+150℃) temperatures;  5)Suitable for among glass,aluminum  material,stone,concrete,brick,ceramic,plastic,structural adhesive and sealing.DIRECTIONS:1)Use of temperature between 5℃~40℃;2)Substrates should be solvent cleaned using two clothes method;3)Cut the nozzle to desired opening at 45°angle ;4)Fill the joint completely;5)Formation of skin in 30minutes,carried out dressingbefore use.IMPORTANT:1)Be material compatibility testing before use;2)Do not use in structural applications or where surface temperatures exceed 45℃ ;3)Should not be used for all Exudation of liquid materials;4)Should not be use in wet or unventilated and close places.PRECAUTIONS:Keep out of the reach of children!Avoid contact with eyes and skin!In case of contact,flush with lot water;If still indisposed,consult a doctor.STANDARDS: GB/T 16776-2005.DURABILITY: 9 Months(<24℃).