AD1321玻璃異型磨邊機適用于圓形，橢圓形及異型玻璃的圓邊、鴨嘴邊、斜邊進行磨削、拋光。它采用了真空將玻璃吸附在吸盤上，電機驅動轉盤旋轉或單獨驅動盤上的一個獨立衛星轉盤旋轉，轉盤轉速可在工作時任意調整。本機利用氣缸也可對簡單開狀異型玻璃進行半自動磨削，磨削周邊時，可安裝三個磨輪進行粗磨、精磨、拋光，磨削斜邊時，可以安裝碗型磨輪，將磨頭向后傾斜，調節斜面角度，以端面加工切削. AD1321 Irregular glass grinding machine,suitable for grinding and polishing the outer edge with rounded or duckbilled shape for circle, oval and irregular flat glass. Glass is absorbed onto vacuum sucker which driven by auxiliary motor, rotary speed can be adjusted as required.   AD1321 Irregular glass grinding machine,suitable for grinding and polishing the outer edge with rounded or duckbilled shape for circle, oval and irregular flat glass. Glass is absorbed onto vacuum sucker, motor driven rotary plate or a separate disk drive is an independent five-star turntable rotation.rotary speed can be adjusted as required. Adopt air cylinder to grind simple shape glass semi-automatically, when grinding the pencil edging, install three grinders to process coarse grinding, fine grinding and polishing; when grinding the beveling, adopt bowl shaped grinding wheels, adjustment the bevel angle by head tilted back the grinders.   主要技術參數   TECHNICAL PECIFICATIONS   電壓 功率 voltage Power 380v/50Hz 23kw 380v/50Hz 23kw 玻璃回轉直徑 加工玻璃厚度 Movable Diameter Glass thickness 100-2000mm 3-25mm 100-2000mm 3-25mm 斜邊角度 轉盤轉度 Oblique angle Speed of the satellite disc 0-15° 0.5-2.5m/min 0-15° 0.5-2.5m/min 機臺重量 外形尺寸 Weight of machine Size(LxWxH) 1000kg 1000x1000x1600mm 1000kg 1000x1000x1600mm